Configuring your ID Tech SRED Key
- Tim` Smith (Unlicensed)
Introduction
The ID TECH SRED Key is a PCI-certified keypad with a secure magnetic swipe reader. When entering card information manually, you can configure the unit to prompt for more or less information to satisfy your winery's requirements.
The simplest mode is Configuration #1, where only the card number and expiration date will be collected.
If you would like to collect AVS or CVV2 information you may want to use other Configuration modes.
The AMS software can also be configured to prompt for AVS and CVV2 info. See Maintain Register Master File (MRM). You should not configure both AMS and the keypad to prompt for this information!
Table of Contents
Feature Setup & Control
Change Procedure
- Hit Admin
- Hit 1 to 6 as desired
- Hit Enter
When the "Admin" key is pressed, the screen will display "Select manual config 1-6" to prompt the user to select one of five manual entry modes.
Configuration #1: Card Number, Expiration Date
Configuration #2: Card Number, Expiration Date, Zip Code
Configuration #3: Card Number, Expiration Date, Street Number of the Address, Zip Code
Configuration #4: Card Number, Expiration Date, Security Code, Zip Code
Configuration #5: Card Number, Expiration Date, Security Code, Address, Zip Code
Configuration #6: Card Number, Expiration Date, Security Code